T14SG Gas mit Hohen Rudder Mischen

[OE8PCK]

Hallo,
Ich wurde gerne den GAS Hebel SL mit der Hohen-ruder koppeln.
d.h. Gas geben und proportional hohen-ruder bewegen.
Ist das möglich mit T14SG und wenn ja wie?

L.g.
Paul

[echo.zulu]

Hi Paul.
Of course is it possible. You only have to use a programmable mixer. There are some things to do. First you have to activate the mixer itsself on the second page. If you want it permanently on, you do not have to programm a switch, otherwise use a switch to turn the mixer on and off. For the desired use I would recommend curve as mixer type. Next you have to tell the transmitter which channels are involved. The MASTER is the channel which is used as input for the mixer. In your case it is MOTOR or THROTTLE. The slave will be the channel which is adjusted by the mixer - in your case HÖHE or ELEVATOR. Now you can set the elevator correction at 5 different points of throttle travel.

I hope that will help you. If you have questions, please let me know.

[OE8PCK]

Danke Egbert, ich muss einmal nachschauen...