Ankündigung

Einklappen
Keine Ankündigung bisher.

Range Check function problem (FX-30/TM14)

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

  • Range Check function problem (FX-30/TM14)

    Hallo,
    Ich kann nur ein bisschen Deutsh sprache lesen und shreiben aber ich denke dass dieses forum ist ein gut platz zu fragen. Bitte enschuldigung aber ich muss shreiben auf inglisch (es tut mir leid aber ich denke es ist better für ihr auch )

    I noticed a strange bug with my brand nex FX-30. The range check function doesn't work if I just change the model, it only works after powering on the transmitter.

    This way works well:
    -power on the transmitter
    -answer NO, do not start transmitting
    -select range check function is the first menu

    If you change the model and answer NO to not begin the Tx it should work as well but it doesn't. In this case I get a screen with an endless progressbar and I am forced to power off and power on the transmitter again to escape.

    In another words: only the model selected when the transmitter is powered on enables the use of the range check function. If you change model, it doesn't work. (you must power off/on again and the new model will be selected enabling range check next time).
    Note that teh problem is only with range check, the transmission at full power starts well everytime.

    Do you have the same problem?

    Thank you and sorry again for not writing in the forum official language.
    Best regards,

    Thomas

    Setup:
    -FX-30 software 1.4 / TM14 / rx 6014
    -english menus
    -no sd card in the transmitetr
    -tried 2.4GHz general and 2.4GHz France, the problem is the same

  • #2
    Hi, Toms,

    I have the same Problem, it is a bug.

    Best Regards
    Helmut

    Kommentar


    • #3
      Hello Helmut, thank you for answering.

      So we know that it is a software flaw. It is not a major issue but it should be fixed anyway. I will drop a line to the robbe/futaba support team, just in case they are not aware of the problem.

      While the issue is not fixed, the workaround to perform a range check is:
      1/power on the radio
      2/select the model
      3/turn OFF the transmitter
      4/power on again and do not start transmitting (answer NO)
      5/perform the range check

      Best regards,

      Thomas

      Kommentar


      • #4
        Hello,
        I tried to send a message to the robbe support team (hotline@robbe.com) but unsuccessfully. I got an automatic back message telling that I cannot reach hotline@robbe.com because my ISP SMTP server is blacklisted.

        Best regards,
        Thomas

        Kommentar


        • #5
          Dann sollte Big Papa Rudi mal in Aktion treten. Der Softwarefehler könnte nämlich ziemlich fatale Auswirkungen haben, wenn man ein Modell wechselt, was bastelt und dann die Reichweite ergründen will.

          Gruß
          Helmut

          Kommentar


          • #6
            Zitat von Bromi
            Dann sollte Big Papa Rudi mal in Aktion treten. Der Softwarefehler könnte nämlich ziemlich fatale Auswirkungen haben, wenn man ein Modell wechselt, was bastelt und dann die Reichweite ergründen will.
            Hi Helmut,

            1.) ist alles schon im laufen
            2.) hast gestern eine PN bekommen

            LG
            RUDI
            Nicht klicken "FSK18"
            Einmal FUTABA immer FUTABA !!
            E-Mail: rudi1025[at]futaba-forum.net

            Kommentar


            • #7

              Hi Thomas,
              Hi Helmut,

              this problem was passed on at Robbe !
              have please something patience
              today or tomorrow still another answer will follow !

              sanfte Grüße aus dem hohen Norden Berlin's
              Steven / Big Papa

              _____________________________________________

              Milchreis schmeckt am besten, wenn man ihn direkt vor dem Verzehr durch ein kräftiges Steak ersetzt !

              Kommentar


              • #8
                first of all:

                1. Transmitters switch on
                2. HF-send no
                3. Range test
                4. Everything well

                Afterwards:

                1. Model change
                2. HF-send no
                3. Range test
                4. Transmitter remains hanging

                must switch off and restart it around this "condition" to RESETS !

                The range test functions only perfectly after first switching on of the transmitter !!
                The transmitter must be switched off always only, after the model change,
                then only a renewed range test can be made.
                a second range test cannot be accomplished within model changes !

                This problem was passed on directly at Futaba.
                A solution will probably take something time.


                sanfte Grüße aus dem hohen Norden Berlin's
                Steven / Big Papa

                _____________________________________________

                Milchreis schmeckt am besten, wenn man ihn direkt vor dem Verzehr durch ein kräftiges Steak ersetzt !

                Kommentar


                • #9
                  Hi Big Papa,
                  OK we say the same thing

                  Since FX-30 and T12FG use the same software, they seems to be twins with different housing. I wonder if T12FG owners are experiencing the same issue with the range check function

                  Kommentar


                  • #10

                    Hi Tom,

                    a range test I made, for that was complete correct !
                    I fly 14 models, without a further range test to have made
                    since I full confidence in 2G4 FASST have
                    however I build the transmitters absolutely correctly into my models


                    sanfte Grüße aus dem hohen Norden Berlin's
                    Steven / Big Papa

                    _____________________________________________

                    Milchreis schmeckt am besten, wenn man ihn direkt vor dem Verzehr durch ein kräftiges Steak ersetzt !

                    Kommentar


                    • #11
                      Robbe has just released the software version 1.5. It fixed this bug is fixed and added some new features (range check redo, memory timers and so on...).

                      As usually it can be downloades from the robbe support download section for registered customers.

                      Thomas

                      Kommentar

                      Lädt...
                      X