Ankündigung

Einklappen
Keine Ankündigung bisher.

The FX36 add more switches

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

  • The FX36 add more switches

    Hello Sir ,

    I have buy a FX36 for my construction crane RC model.

    if want add more the switch on the FX 36 for my RC model use .
    how do I connect these switch wires?

    I have try open the back cover . only find two connector SI and SJ .
    I plan use the SI and SJ for the stick switch with 3-pos and push button switch I just order from RC technik .

    Because there are only two connectors
    If I have more switches installed, how do I connect these switch wires?

    please try help me thanks,
    01.jpg
    02.jpg
    03.jpg


    Thank you ,

    Best Regards,
    ChihMing Chou

  • #2
    Hello,
    There are still two cables with plug for SF and SC available.
    With SI and SJ four additional switches are possible
    greeting
    ​
    Alfred

    Kommentar


    • #3
      Zitat von Alfredo_3 Beitrag anzeigen
      Hello,
      There are still two cables with plug for SF and SC available.
      With SI and SJ four additional switches are possible
      greeting
      ​
      Alfred
      Thank you.

      I think your mean are the two cables of the F/H and A/C . Thanks.

      but I just think about the several other reserved locations, if I have more switch installed .
      Where can I have a socket?

      05.jpg

      Thank you ,

      Best Regards,
      ChihMing Chou

      Kommentar


      • #4
        Hi ChihMing Chou
        yes, I meant these cables.
        I think that with 10 switches, this is the end of the FX 36.
        The case of the FX 36 is taken over as a desk transmitter from an older series. Since you could install a "multi-switch module".
        greeting
        Alfred

        Kommentar


        • #5
          Zitat von Alfredo_3 Beitrag anzeigen
          Hi ChihMing Chou
          yes, I meant these cables.
          I think that with 10 switches, this is the end of the FX 36.
          The case of the FX 36 is taken over as a desk transmitter from an older series. Since you could install a "multi-switch module".
          greeting
          Alfred
          Hello Sir,
          Many thank you for this reply .
          I just check the internet have many type of the "multi-switch module".
          Can you recommend or suggest ...which one is recommended for use in FX-36.
          because I am from Asia , very few like this data info can reference .

          my email address:choucm@ms4.hinet.net
          If you don't mind, I hope I can contact you by mail.


          Thank you ,

          Best Regards,
          ChihMing Chou

          Kommentar

          Lädt...
          X