Ankündigung

Einklappen
Keine Ankündigung bisher.

18sz, throttle control for butterfly

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

  • 18sz, throttle control for butterfly

    Hello,

    In landing flight phase, I would like to control the butterfly function with the throttle stick on my 18SZ.
    This means that the electrical motor must remain off in this flight phase.

    Can somebody tell me how to program?
    As I can read german, you can write in german🤓



    Already thanks!!!

    Eric

  • #2
    Hi Eric,

    I used the Motor off function and put it on the same switch as the flight phase.

    Works perfect.

    Cheers
    Markus

    Kommentar


    • #3
      Hi Markus,

      Ok, in the landing phase, I changed the status to ON and as switch, I did selected the same sw as the one I used for the landing phase. Does no work��




      image.jpg
      Zuletzt geändert von Speedrick; 20.05.2016, 22:57.

      Kommentar


      • #4
        I meant this Motor Off function:

        image.jpg
        image.jpg

        Kommentar


        • #5
          Ok Markus,

          Switched ACT/INH to OFF, and moved the cut position to 0.
          Cannot change the position of the white arrow��



          image.jpg

          Kommentar


          • #6
            hmmm.
            Did you try it with a new model ?

            I remember I was also struggeling with one model where it whyever did not work.

            Kommentar


            • #7
              Euh, no.....

              I'll try that tomorrow morning and keep you informed.
              Many thanks already for the assistance!!!!!



              Kind regards,

              Eric

              Kommentar

              Lädt...
              X