Hi,
Yesterday, I did the first flight with the new transmitter.
After a whole day of programming my Simprop Solution XL, she was ready to go.
First 20 mins where ok, but then I made a looping. Then it went wrong, as I lost
elevator control and the glider went vertically into the ground, Total loss.
Once arrived at home, investigation was started. Battery voltage was checked, 7,04V. (5s enelope)
Battery discharged, still 2200mAh in it. Servo's, tested with a servo checker, OK
Receiver, R6014HS, was externally not damaged, only one antenna's was broken off, due
to the chrash. Green light was blinking.
Upto now, nothing concrete was found, making me believe something is wrong with the
New transmitter. Range test OK. Does somebody know what to do, or what to blame?
This chrash was a 1200€ one, so i'd rather try to avoid similar ones in the future....
Kind Regards,
Eric
Yesterday, I did the first flight with the new transmitter.
After a whole day of programming my Simprop Solution XL, she was ready to go.
First 20 mins where ok, but then I made a looping. Then it went wrong, as I lost
elevator control and the glider went vertically into the ground, Total loss.
Once arrived at home, investigation was started. Battery voltage was checked, 7,04V. (5s enelope)
Battery discharged, still 2200mAh in it. Servo's, tested with a servo checker, OK
Receiver, R6014HS, was externally not damaged, only one antenna's was broken off, due
to the chrash. Green light was blinking.
Upto now, nothing concrete was found, making me believe something is wrong with the
New transmitter. Range test OK. Does somebody know what to do, or what to blame?
This chrash was a 1200€ one, so i'd rather try to avoid similar ones in the future....
Kind Regards,
Eric
Kommentar